Microsoft (R) Windows Debugger Version 6.9.0003.113 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\MEMORY.DMP]
Kernel Complete Dump File: Full address space is available
Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 3) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp.080413-2111
Kernel base = 0x804d8000 PsLoadedModuleList = 0x8055c1c0
Debug session time: Thu Oct 2 22:57:35.609 2008 (GMT+8)
System Uptime: 0 days 0:31:35.197
Loading Kernel Symbols
...................................................................................................................................................
Loading User Symbols
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 00240008, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 804f390e, address which referenced memory
Debugging Details:
------------------
READ_ADDRESS: 00240008
CURRENT_IRQL: 2
FAULTING_IP:
nt!CcUnmapVacbArray+f0
804f390e 66837e0800 cmp word ptr [esi+8],0
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
TRAP_FRAME: f8a3ec10 -- (.trap 0xfffffffff8a3ec10)
ErrCode = 00000000
eax=00000006 ebx=806f12d0 ecx=82cae080 edx=82fa98a0 esi=00240000 edi=82b27008
eip=804f390e esp=f8a3ec84 ebp=f8a3ecac iopl=0 nv up ei pl nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010206
nt!CcUnmapVacbArray+0xf0:
804f390e 66837e0800 cmp word ptr [esi+8],0 ds:0023:00240008=????
Resetting default scope
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 00240008, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 804f390e, address which referenced memory
Debugging Details:
------------------
READ_ADDRESS: 00240008
CURRENT_IRQL: 2
FAULTING_IP:
nt!CcUnmapVacbArray+f0
804f390e 66837e0800 cmp word ptr [esi+8],0
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
TRAP_FRAME: f8a3ec10 -- (.trap 0xfffffffff8a3ec10)
ErrCode = 00000000
eax=00000006 ebx=806f12d0 ecx=82cae080 edx=82fa98a0 esi=00240000 edi=82b27008
eip=804f390e esp=f8a3ec84 ebp=f8a3ecac iopl=0 nv up ei pl nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010206
nt!CcUnmapVacbArray+0xf0:
804f390e 66837e0800 cmp word ptr [esi+8],0 ds:0023:00240008=????
Resetting default scope